Switching on/off
WARNING
Repeatedly setting the seat heating to level
3 may result in excessive seat temperatures.
The health of passengers that have limited
temperature sensitivity or a limited ability to
react to excessively high temperatures may
be affected or they may even suffer burn-like
injuries. Therefore, do not use seat heating
level 3 repeatedly.
The three red indicator lamps in the button indicate the heating level you have selected.
If the battery voltage is too
low, the seat
heating may switch off.
Driver's and front-passenger seat
Rear-compartment seats
The system automatically switches down from level 3 to level 2 after approximately eight minutes.
The system automatically switches down from level 2 to level 1 after approximately ten minutes.
The system automatically switches off approximately 35 minutes after it is set to level 1.
- Make sure that the SmartKey is in position
1 or 2 in the ignition lock.
- To switch on: press button 1 repeatedly
until the desired heating level is set.
- To switch off: press button 1 repeatedly
until all the indicator lamps go out.
See also:
Notes for 4MATIC vehicles
Vehicles with 4MATIC must not be towed
with either the front or the rear axle raised,
as doing so will damage the transmission.
If the vehicle has transmission damage or
damage to the fron ...
Vehicle equipment
This Operator's Manual describes all models
and all standard and optional equipment of
your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences a ...
Performance
The nice thing about being able to afford the ML550 is the 382-horsepower V-8
under its hood. Calling this SUV "fast" is an understatement. Mercedes says it
goes from zero to 60 mph in 5 ...