Resetting the panorama roof with power tilt/sliding panel and the roller sunblinds
Reset the panorama roof with power tilt/ sliding panel and the roller sunblinds if the panorama roof with power tilt/sliding panel or the roller sunblinds do not move smoothly.
- Turn the SmartKey to position 1 or 2 in the ignition lock.
- Pull the
switch repeatedly to the point
of resistance in the direction of arrow 3
until the panorama roof with power tilt/sliding panel is fully closed.
- Keep switch
pulled for an additional
second.
- Pull the
switch repeatedly to the point
of resistance in the direction of arrow 3
until the roller sunblinds are fully closed.
- Keep switch
pulled for an additional
second.
- Make sure that the panorama roof with power tilt/sliding panel and the roller sunblinds can be fully opened again.
- If this is not the case, repeat the steps above again.
If the panorama roof with
power tilt/sliding panel and the roller sunblind cannot
be fully opened or closed after resetting,
contact a qualified specialist workshop.
See also:
Lane recommendations
Overview
On multilane roads, COMAND can display
lane recommendations for the next change of
direction. The corresponding data must be
available in the digital map.
COMAND displays lane recomme ...
Message memory menu
The on-board computer saves certain display messages. You can call up the
display messages
in the message memory menu.
The message memory menu is only shown if any display messages have been sto ...
Changing gear
The automatic transmission shifts to the
individual gears automatically when it is in
transmission position D. This automatic
gearshifting behavior is determined by:
- a possible limitation of ...