Opening and closing

Overhead control panel
Overhead control panel

1 To raise
2 To open
3 To close/lower

The panorama roof with power tilt/sliding panel can only be operated when the roller sunblind is open.
- Turn the SmartKey to position 1 or 2 in the ignition lock.
- Push or pull the switch in the switch in the corresponding direction.

If you press the switch beyond the switch beyond the point of resistance, an automatic opening/closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again.
When raising the roof, automatic operation is only available if the sliding sunroof is in the closed position.

    See also:

    Problems with the engine
    Problem The engine does not start. The starter motor can be heard. Possible causes/consequences and Solutions There is a malfunction in the engine electronics. There is a malfunction in the fu ...

    Driving systems
    Display messages Possible causes/consequences and Solutions Based on specific criteria, ATTENTION ASSIST has determined that the driver is tired or paying less attentio ...

    View through the camera
    The area behind the vehicle is displayed in a mirror-inverted manner, as in the rear-view mirror. WARNING The rear view camera is only an aid and may display obstacles - from a distorted per ...