Opening and closing the side windows

1 Front left
2 Front right
3 Rear right
4 Rear left
The switches for all side windows are located on the driver's door. There is also a switch on each door for the corresponding side window.
The switches on the driver's door take precedence.
The side windows cannot be
operated
from the rear when the override feature for
the side windows is activated.
- Turn the SmartKey to position 1 or 2 in the
ignition lock.
- To open: press the corresponding switch.
- To close: pull the corresponding switch.
If you press the switch beyond
the point
of resistance, an automatic opening/closing process is started in the
corresponding direction. You can stop
automatic operation by operating the
switch again.
You can continue to operate the
side
windows after you switch off the engine or
remove the SmartKey. This function is
available for up to five minutes or until the
driver's or front-passenger door is opened.
See also:
BlueDIRECT: third-generation direct injection
Direct petrol injection with spray-guided combustion, which Mercedes-Benz was
the first car manufacturer to introduce in series production, has been developed
further by the engineers into third-g ...
Message memory
The on-board computer saves certain display messages. You can call up the
display messages
in the message memory.
– Press the or
button on the steering wheel to
select the Serv. menu.
If th ...
Introduction
SRS consists of:
- the SRS warning lamp
- air bags
- air bag control unit (with crash sensors)
- Emergency Tensioning Devices for the front seat belts and the outer seat belts
in the rear
- be ...
