Automatic locking feature

The vehicle locks automatically when the ignition is switched on and the wheels of the vehicle are turning at a speed of more than 9 mph (15 km/h).
You could therefore be locked out when:
- the vehicle is being pushed.
- the vehicle is being towed.
- the vehicle is being tested on a dynamometer.

- To deactivate: press and hold button 1

- To deactivate: press and hold button 1 for about five seconds until a tone sounds.
- To activate: press and hold button 2 for about five seconds until a tone sounds.

buttons and If you press one of the two buttons and do not hear a tone, the relevant setting has already been selected.

You can also switch the automatic locking function on and off using the on-board computer.

    See also:

    Please bear the following in mind
    For safety reasons, Mercedes-Benz recommends that you only use Tires and wheels which have been approved by Mercedes-Benz specifically for your vehicle. These tires have been specially ada ...

    Checking the oil level using the oil dipstick
    Park the vehicle on a level surface. To check the oil level with the engine at normal operating temperature, switch the engine off and wait for approximately five minutes. Pull oil dipst ...

    Fogged up or dirty windshield
    If the windshield in front of the camera is fogged up or dirty on the inside or outside, the Night View Assist Plus display is affected. WARNING Please do not forget that your primary respons ...