Checking the battery
- Press the or
button.
The battery is working properly if battery
check lamp 1 lights up briefly
If battery check lamp 1 does not light up
briefly during the test, the battery is
discharged.
- Changing the battery.
You can obtain the battery at a qualified specialist workshop.
If the SmartKey battery is checked within the signal reception range of the vehicle, pressing the or button locks or unlocks the vehicle.
See also:
Engine number
1 Emission control information plate,
including the certification of both federal
and Californian emissions standards
2 Engine number (stamped into the
crankcase)
3 VIN (on the lower edge of th ...
Position of the steering wheel when theEASY-ENTRY/EXIT feature is active
The steering wheel swings upwards when
you:
• remove the SmartKey from the ignition
lock
• open the driver's door and KEYLESS-GO is
in position 1
• open the driver's door and the SmartKey is
...
Attaching the cargo net
– Pull the cargo net up by tab 1 and hook it
into eyelets 2 using both hands. ...