Immobilizer
The immobilizer prevents your vehicle from being started without the correct SmartKey.
When leaving the vehicle, always take the SmartKey with you and lock the vehicle. The engine can be started by anyone with a valid SmartKey that is left inside the vehicle.
- To activate with the SmartKey: remove
the SmartKey from the ignition lock.
- To activate with KEYLESS-GO: switch the
ignition off and open the driver's door.
- To deactivate: switch on the ignition.
The immobilizer is always
deactivated
when you start the engine.
In the event that the engine cannot be
started when the starter battery is fully
charged, the immobilizer may be faulty.
Contact an authorized Mercedes-Benz
Center or call 1-800-FOR-MERCedes (in
USA) or 1-800-387-0100 (in Canada).
See also:
Setting the center air vents
1 Center air vent, left
2 Center air vent, right
3 Center vent thumbwheel, right
4 Center vent thumbwheel, left
► To open/close: turn thumbwheels 3 and 4
to the right or left. ...
Using the TIREFIT kit
You can use the TIREFIT kit to seal small
punctures, particularly those in the tire tread.
You can use TIREFIT at outside temperatures
down to -4 °F (-20 °C).
WARNING
TIREFIT is a l ...
Tire size designation, load-bearingcapacity and speed index
1 Tire width
2 Nominal aspect ratio in %
3 Tire code
4 Rim diameter
5 Load bearing index
6 Tire speed rating
Tire data is vehicle-specific and may
deviate from the data in the example.
Ge ...