Releasing seat belts
Press release button 4 and
guide belt tongue 2 back towards belt
sash guide 1.
Make sure that the seat belt is
fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped in the door or in the seat
mechanism. This could damage the door,
the door trim panel and the seat belt.
Damaged seat belts can no longer fulfill
their protective function and must be
replaced. Consult an authorized Mercedes-Benz Center.
See also:
Problems with the rear window
defroster
The rear window defroster has deactivated
itself prematurely or cannot be activated.
- Switch off any consumers that are not
required, e.g. reading lamps or interior
lighting.
When the battery ...
Deactivating/activating ESP®
WARNING
Never switch off the ESP when you see the
ESP warning lamp flashing in the
instrument cluster. In this case proceed as
follows:
- When driving off, apply as little throttle ...
Activating/deactivating airrecirculation
mode
You can deactivate the flow of fresh air if
unpleasant odors are entering the vehicle
from outside. The air already inside the
vehicle will then be recirculated.
The operation of air-recirculat ...