Temperature
WARNING 
The temperature grade for this tire is
established for a tire that is properly inflated
and not overloaded. Excessive speed,
underinflation, or excessive loading, either
separately or in combination, can cause
excessive heat build-up and possible tire
failure.
The temperature grades are A (the highest), B, and C. These represent the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.
See also:
Example: step 1 to 3
The following table shows examples on how to calculate total and cargo load
capacities with
varying seating configurations and number and size of occupants. The following
examples use
a load l ...
Setting the glove box air vent
When automatic climate control is activated,
the glove box can be cooled, for instance to
cool its contents. The level of airflow depends
on the airflow and air distribution settings.
At high o ...
System self-test
After you have switched on the ignition, the
system carries out a self-diagnosis.
WARNING
A malfunction in the system has been
detected if one of the following conditions
occurs:
- the indic ...