Fuse box in the engine compartment
► Open the hood.

Illustrated: GL 450 (GL 350 BlueTEC, GL 550 are similar)
► Remove any existing moisture from the
fuse box using a dry cloth.
► To open: open clamps 2.
► Fold up cover 1 and remove it towards the
front of the vehicle.
Make sure that no moisture can enter the
fuse box when the cover is open.
► To close: check whether the seal is
lying
correctly in cover 1.
► Insert cover 1 into the retainer at the
rear
of the fuse box.
► Fold down cover 1 and close clamps 2.
The cover must be positioned properly.
Moisture or dirt could otherwise impair the operation of the fuses.
► Close the hood.
See also:
Deactivating DISTRONIC PLUS
There are several ways to deactivate
DISTRONIC PLUS:
Briefly press the cruise control lever
forwards 1.
or
Brake, unless the vehicle is stationary.
When you deactivate DISTRONIC PLUS, the ...
Overview of Tire Quality Grading Standards
The Uniform Tire Quality Grading is a U.S. Government requirement. Their purpose
is to provide drivers with consistent and reliable information regarding tire performance.
Tire manufacturers are ...
ESP® trailer stabilization
If your vehicle with trailer (vehicle/trailer
combination) begins to lurch, you can only
stabilize the vehicle/trailer combination by
depressing the brake firmly.
In this situation, ESP® assist ...
