Cleaning the display

► Before cleaning the display, make sure that it is switched off and has cooled down.
► Clean the display surface using a commercially-available microfiber cloth and TFT/LCD display cleaner.
► Dry the display surface using a dry microfiber cloth.

following: For cleaning, do not use any of the following:

• alcohol-based thinner or gasoline
• abrasive cleaning agents
• commercially-available household cleaning agents

These may damage the display surface. Do not put pressure on the display surface when cleaning. This could lead to irreparable damage to the display.

    See also:

    Socket in the front-compartment centerconsole
    If accessories are connected, make sure that a maximum current draw of 15 A is not exceeded. Otherwise, you will overload the fuse. The socket is not suitable for operating the tire inflati ...

    Reporting malfunctions relevant tosafety
    For the USA only: The following text is reproduced as required of all manufacturers according to Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the National Traffic and Motor ...

    Headlamp cleaning system
    The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated ten times while the lights are on and the engine is running. When you switch off the igni ...