Checking the oil level using the oildipstick
When checking the oil level:
• park the vehicle on a level surface.
• the engine should be switched off for
approximately five minutes if the engine is
at normal operating temperature.
Example: vehicles with a gasoline engine
Example: vehicles with a diesel engine
► Pull oil dipstick 1 out of the dipstick
guide
tube.
► Wipe off oil dipstick 1.
► Slowly slide oil dipstick 1 into the guide
tube to the stop, and take it out again.
The oil level is correct if the level is between MIN mark 3 and MAX mark 2.
► Add oil if necessary.
See also:
Activating/deactivating the residual
heat function
The residual heat function is only available in
vehicles for Canada with automatic climate
control.
It is possible to make use of the residual heat
of the engine to continue heating the
stati ...
Important safety notes
You can limit the opening angle of the
tailgate. This is possible in the top half of its
opening range, up to approximately
4 in (10 cm) before the stop.
Make sure there is sufficient
cleara ...
Recommended tire pressure
The recommended tire pressure applies to
the tires mounted at the factory.
The Tire and Loading Information placard
contains the recommended tire pressures for
cold tires on a fully loaded vehi ...