Floormat on the driver's side

WARNING Whenever you are using a floormat, make sure 
Whenever you are using a floormat, make sure there is enough clearance and that the floormat is securely fastened.
The floormat should always be securely fastened using the fastening equipment.
Before driving off, check that the floormat is securely in place and adjust it if necessary. A loose floormat could slip and hinder proper functioning of the pedals.
Do not place several floormats on top of each other as this may impair pedal movement.

► Slide the seat backwards.

Slide the seat backwards.
To install: place the floormat in the footwell.
Press studs 1 onto retainers 2.
To remove: pull the floormat off retainers 2.
Remove the floormat.

    See also:

    Problems with the SmartKey
    Problem Possible causes/consequences and Solutions You cannot lock or unlock the vehicle using the SmartKey. The SmartKey battery is discharged or nearly discharged. ...

    Setting the temperature in the rear compartment using the rear control panel
    Turn the SmartKey to position 2 in the ignition lock. To increase/reduce: press rocker switch 12 or 17 up or down. Only change the temperature setting in small increments. Start at 72 °F (22 ...

    Activating/deactivating
    - To activate: press the button. The indicator lamp in the button lights up. - To deactivate: press the button. The indicator lamp in the button goes out. The cooling with air dehumid ...