Time/date

This submenu is only available on vehicles with no navigation module. To set the time and the date for vehicles with a navigation module, see the separate operating instructions.

In the Time/date submenu, you can set the time and date.

► Press to select the Settings... menu. on the steering wheel to select the Settings... menu.
► Press the ► Press the button to select submenus.
► Press the Time/date submenu. button to select the Time/date submenu.
► To set the time: press Clock Set Hour or Clock Set to select Clock Set Hour or Clock Set Minute(s).
or
► To set the date: press & to select Date Set Day, Date Set Month or Date Set Year.
► Press ► Press the to set a value.
► Press the button to, select a different display. button to select a different display.

    See also:

    Trip computer "From start" or "From reset
    The values in the From Start submenu are calculated from the start of a journey, while the values in the From Reset submenu are calculated from the last time the submenu was reset. Press the ...

    Servicing the brakes
    If the red brake warning lamp lights up in the instrument cluster and you hear a warning tone while the engine is running, the brake fluid level may be too low. Observe additional warning ...

    Deactivating/activating ESP®
    WARNING Under no circumstances should you deactivate ESP® when the ESP® warning lamp in the instrument cluster flashes. Proceed as follows: • when driving off, apply as little throttle as ...