Resetting to factory settings

For safety reasons, the Daytime Running Lamps function in the Lighting submenu is only reset when the engine is switched off.

► Press to select the Settings menu. on the steering wheel to select the Settings menu.
► Press and hold the R reset button on the instrument cluster for approximately three seconds.

A prompt appears in the multifunction display asking you to confirm by pressing the R reset button again.

► Press the R reset button again.

The settings of most functions are restored to the factory settings.
or
► If you want to retain the settings, do not press the R reset button a second time.
After approximately five seconds, the Settings menu reappears.
► Press the different menu. button to select a different menu.

    See also:

    The windshield wipers are inoperative
    The windshield wiper drive is malfunctioning. - Select another wiper speed on the combination switch. - Have the windshield wipers checked at a qualified specialist workshop. ...

    High-beam headlamps (halogen headlamps)
    Switch off the lights. Open the hood. Remove the headlamp cover (). Left-hand headlamp: detach the washer fluid reservoir (). Turn housing cover 1 counter-clockwise and pull it out. Pre ...

    DEF
    Important safety notes For BlueTEC vehicles only. DEF is a non-flammable, non-toxic, colorless, odorless and water-soluble fluid. Only use DEF that complies with ISO 22241. Do not add any ...