DISTRONIC displays in themultifunction display

► Press the DISTRONIC menu. button to select the DISTRONIC menu.

Display when DISTRONIC is deactivated

When DISTRONIC is deactivated, you will see the following in the multifunction display:

1 Vehicle in front, if detected

1 Vehicle in front, if detected
2 Distance indicator, displaying current distance to the vehicle in front
3 Specified minimum distance to the vehicle in front, adjustable
4 Own vehicle

Display when DISTRONIC is activated

After this time, you will see the following in the multifunction display while DISTRONIC is activated:

1 DISTRONIC activated

1 DISTRONIC activated
2 Stored speed

When activating DISTRONIC and when setting the speed, stored speed 2 appears for around five seconds.

After approximately five seconds, current saved speed 2 is displayed in the multifunction display's status indicator:

• USA only: DTR XXX Miles
• Canada only: DTR XXX km/h

    See also:

    Removing a wheel
      Unscrew the wheel bolts. Do not place wheel bolts in sand or on a dirty surface. The bolt and wheel hub threads could otherwise be damaged when you screw them in.   Remove the w ...

    Safety systems
    Display messages (USA only) (Canada only) The red brake system warning lamp comes on while the engine is running. A warning tone also sounds. Possible causes/consequences and ► Soluti ...

    Important safety notes
    WARNING Severe conditions (e.g. strong air pollution) may require replacement of the filter before its scheduled replacement interval. A clogged filter will reduce the air volume to the interi ...