Driving

Important safety notes

WARNING Make sure absolutely no objects are 
Make sure absolutely no objects are obstructing the pedals' range of movement.
Keep the driver's footwell clear of all obstacles. If there are any floormats or carpets in the footwell, make sure the pedals still have sufficient clearance.
During sudden driving or braking maneuvers the objects could get caught between the pedals. You could then no longer brake or accelerate. This could lead to accidents and injury.

WARNING On slippery road surfaces, never downshift in 
On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle's ABS will not prevent this type of loss of control.

WARNING It is dangerous to shift the automatic 
It is dangerous to shift the automatic transmission out of parking position P or neutral position N if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal.

the engine's full performance until it has Warm up the engine quickly. Do not use the engine's full performance until it has reached operating temperature.

Only shift the automatic transmission to the desired drive position when the vehicle is stationary.

Where possible, avoid spinning the drive wheels when pulling away on slippery roads. You could otherwise damage the drive train.

See also:

Fuse box on the left in the direction of travel
Open the hood. Remove any existing moisture from the fuse box using a dry cloth. AMG vehicles: remove the control unit above the fuse box. To open: undo screws 1 with an Allen key. ...

Overview
The on-board computer is activated as soon as you turn the SmartKey to position 1 in the ignition lock. You can control the multifunction display and the settings in the on-board computer using ...

Parking lamps/standing lamps (halogen headlamps)
•► Switch off the lights. •► Open the hood. •► Turn housing cover 1 counter-clockwise and pull it out. •► Pull out bulb holder 2. •► Take the bulb out of bulb hol ...