Setting climate control to automatic

WARNING If you switch off the cooling function, the 
If you switch off the cooling function, the vehicle will not be cooled when weather conditions are warm. The windows can fog up more quickly. Window fogging may impair visibility and endanger you and others.

In automatic mode, the set temperature is maintained automatically at a constant level.

The system automatically regulates the temperature of the dispensed air, the airflow and the air distribution.

Automatic mode will achieve optimal operation if cooling with air dehumidification is also activated. If desired, cooling with air dehumidification can be deactivated.

Controlling the front climate control using the front control panel

► Turn the SmartKey to position 2 in the ignition lock.
► Set the desired temperature.
► To activate: press the button.

The indicator lamp in the lights button lights up. Automatic air distribution and airflow are activated.

► To deactivate: press the button.

The indicator lamp in the goes button goes out. Automatic airflow is deactivated and the airflow is controlled according to the level set. Automatic air distribution remains activated.
or
► Press the button., button.

The indicator lamp in the goes button goes out. Automatic air distribution is deactivated. Air distribution is controlled according to the position set. Automatic airflow remains activated.

Controlling the rear-compartment climate control automatically using the rear control panel

► Turn the SmartKey to position 2 in the ignition lock.
► Switch on automatic climate control using the front control panel.
► Set the desired temperature.
► To activate: press the button.

The indicator lamp in the lights button lights up. Automatic air distribution and airflow are activated.

► To deactivate: press the button.

Automatic airflow is deactivated and the airflow is controlled according to the level set. Automatic air distribution remains activated.
or
► Press one of the buttons.

Automatic air distribution is deactivated.

Air distribution is controlled according to the position set. Automatic airflow remains activated.

    See also:

    Range of the sensors
    General notes The sensors must be free of dirt, ice and slush; otherwise they may not function correctly. Clean the sensors regularly, taking care not to scratch or damage them. Side view ...

    Assistants to see and be seen better
    The Adaptive High Beam Assist system is now offered as standard equipment on the Mercedes-Benz CL-Class. This camera-based system can recognize oncoming vehicles or vehicles ahead with their light ...

    Panic alarm
    To activate: press button 1 for at least one second. An alarm sounds and the exterior lighting flashes. To deactivate: press button 1 again. or Insert the SmartKey into the ignition loc ...