Turn signal lamps/side marker lamps
► Switch off the lights.
► Open the hood.
► Turn bulb holder 1 (WY 5 W)/2 (3457A)
counter-clockwise and pull it out.
► Remove the bulb from bulb holder 1/2.
► Insert the new bulb into bulb
holder 1/2.
► Insert bulb holder 1/2 and turn it
clockwise.
See also:
Opening and closing
You can continue to operate the sliding
sunroof after switching off the engine or
removing the SmartKey from the ignition
lock. This function is available for up to five
minutes or until the ...
Activation conditions
You can activate the HOLD function if:
• the vehicle is stationary.
• the driver's door is closed or your seat belt is fastened.
• the electric parking brake is released.
• the hood is clo ...
Transfer case
This section is only valid for vehicles with 4-
wheel drive (4MATIC). Power is always
transmitted to both axles.
Performance tests may only be carried
out on a 2-axle dynamometer. The brake
...