Headlamp cleaning system
The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated five times while the lights are on and the engine is running. When you switch off the ignition, the automatic headlamp cleaning system is reset and counting is resumed from 0.
See also:
Warning and display messages in the multifunction display
Activate ATTENTION ASSIST using
the onboard
computer.
Symbol 1 appears in the multifunction
display.
If ATTENTION ASSIST is active, you will be
warned no sooner than 20 minutes after your ...
Parking lamps/standing lamps
(halogen headlamps)
•► Switch off the lights.
•► Open the hood.
•► Turn housing cover 1 counter-clockwise
and pull it out.
•► Pull out bulb holder 2.
•► Take the bulb out of bulb hol ...
SmartKey
Display messages
Possible causes/consequences and •► Solutions
Key Does Not
Belong to Vehicle
You have put the wrong SmartKey in the ignition lock.
•► Use the correct ...