Opening and closing the sidewindows

1 Front left

1 Front left
2 Front right
3 Rear right
4 Rear left

The switches for all side windows are located on the driver's door. There is also a switch on each door for the corresponding side window.

The switches on the driver's door take precedence.

from the rear when the override feature for The side windows cannot be operated from the rear when the override feature for the side windows is activated.

► Turn the SmartKey to position 1 or 2 in the ignition lock.
► To open: press the corresponding switch.
► To close: pull the corresponding switch.

of resistance, an automatic opening/closing process is started in the If you press the switch beyond the point of resistance, an automatic opening/closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again.

windows after you switch off the engine or You can continue to operate the side windows after you switch off the engine or remove the SmartKey. This function is available for up to five minutes or until the driver's or front-passenger door is opened.

    See also:

    Important safety notes
    WARNING When towing a trailer, incorrect equipment and driving style could cause you to lose control of the vehicle. Towing incorrectly or not observing this Operator's Manual could lead to d ...

    Correct use of the seat belts
    WARNING USE SEAT BELTS PROPERLY Seat belts can only work when used properly. Never wear seat belts in any other way than as described in this section, as that could result in serious i ...

    Avoiding a section of the route blocked by a traffic jam
    This function blocks a section of the route ahead of you. You can set the length of the blocked route section. If possible, COMAND calculates a detour around the blocked section of the route. ...