Locking the vehicle
If the vehicle can no longer be locked with the SmartKey, you can lock it by taking the following steps.
► Close the front-passenger door, the
rear
door on the front-passenger side and the
tailgate.
► Open the driver’s door and the rear door
on
the driver’s side.
► Press the locking button on the driver’s
door.
The locking knobs in the front-passenger door and in the rear doors drop down.
►Press down the locking knobs in the
frontpassenger
and rear doors manually, if
necessary.
► Close the driver's door from the
outside.
► Press down the locking knob of the
driver's
door by reaching in through the open rear
door.
Make sure that you have the SmartKey on
your person and that it has not been left in
the vehicle.
► Close the rear door on the driver’s
side.
► Make sure that the doors and the tailgate
are locked.
If you lock the vehicle as described above,
the fuel filler flap is not locked. The antitheft
alarm system is not armed.
See also:
Important safety notes
WARNING
When leaving the vehicle, always remove the
SmartKey from the ignition lock. Always take
the SmartKey with you and lock the vehicle.
Do not leave children unsupervised in the
...
Using KEYLESS-GO to start the engine
WARNING
As long as the SmartKey is in your vehicle, the
vehicle can be started. Therefore, never leave
children unattended in the vehicle, as they
could otherwise accidentally start the engin ...
Overview
The on-board computer is activated as soon
as you turn the SmartKey to position 1 in the
ignition lock.
You can control the multifunction display and
the settings in the on-board computer using ...