Installing the towing eye
Vehicles with a trailer tow hitch: if possible, secure the towing device on the trailer tow hitch ().
X Remove the towing eye from the vehicle tool kit ().
WARNING
The exhaust tail pipe may be hot. You could burn yourself if you touch the tail pipe. Be particularly careful when removing the rear cover.
The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.
Vehicles without the AMG Sports package
Vehicles with the AMG Sports package
- Press the mark on cover 1 inwards in the direction of the arrow. Rear bumper on vehicles with AMG Sports package: pry cover 1 out of the bumper by inserting a blunt, flat object into the recess.
- Take cover 1 off the opening.
- Screw the towing eye in clockwise to the stop and tighten it.
See also:
Cleaning the trailer tow hitch
The ball coupling must be cleaned if it becomes dirty or corroded.
Remove rust on the ball of the ball coupling, e.g. with a wire brush.
Remove dirt with a clean, lint-free cloth or a brush.
A ...
2011 Mercedes-Benz S-Class Review by Scott Burgess
Luxury comes with nuances.
Little things denote one fine ride: The look of the thread on the dashboard
stitching, the smell of the leather, the crystal-like headlamps. Even the sound
of the trun ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences ...