Power washers
WARNING
Do not use power washers with circular-jet nozzles (dirt grinders) to clean your vehicle, in particular the tires. You could otherwise damage the tires and cause an accident.
Always maintain a distance of at least 11.8 in (30 cm) between the vehicle
and the power washer nozzle. Information about the correct distance is available
from the equipment manufacturer.
Move the power washer nozzle around when cleaning your vehicle.
Do not aim directly at any of the following:
- tires
- door gaps, roof gaps, joints etc.
- electrical components
- battery
- connectors
- lights
- seals
- trim elements
- ventilation slots
Damaged seals or electrical components can lead to leaks or failures.
See also:
Control panel for 3-zone automatic climate control
Canada only
Front control panel
1. To set climate control to automatic
2. To defrost the windshield
3. To switch the ZONE function on/off
4. Display
5. To activate/deactivate air-r ...
Making adjustments in 5 mph (Canada: 10 km/h) increments
Briefly press the cruise control
lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Automatic headlamp mode
- To switch on automatic headlamp
mode: turn the light switch to or
.
SmartKey in position 1 in the ignition lock:
the parking lamps are switched on or off
automatically depending on the brig ...