Storing the current speed or calling up the last stored speed

WARNING WARNING

The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.

  • Briefly pull the cruise control lever towards you ?.
  • Remove your foot from the accelerator pedal.
    The first time cruise control is activated, it stores the current speed or regulates the speed of the vehicle to the previously stored speed.
See also:

Emergency Tensioning Devices, belt force limiters
The front seat belts and the outer seat belts in the rear are equipped with ETDs and seat belt force limiters. The ETDs tighten the seat belts in an accident, pulling them close against the bod ...

Tire tread
WARNING   Although the applicable federal motor vehicle safety laws consider a tire to be worn when the tread wear indicators (TWI) become visible at approximately 1/16 in (1.6 mm), we r ...

DISTRONIC displays in themultifunction display
► Press the button to select the DISTRONIC menu. Display when DISTRONIC is deactivated When DISTRONIC is deactivated, you will see the following in the multifunction display: 1 Vehicle ...