Opening
- Switch off the engine.
- emove the SmartKey from the ignition lock.
KEYLESS-GO: open the driver’s door. This switches the ignition to position 0, which corresponds to having removed the SmartKey. The driver’s door can be closed again. - Press the fuel filler flap in the direction of arrow 1.
The fuel filler flap opens slightly. - Open the fuel filler flap.
- Turn the fuel filler cap counter-clockwise and remove it.
- Insert the fuel filler cap into the holder bracket on the inside of filler flap 2.
- Completely insert the pump nozzle into the filler neck and refuel.
- Only fill the tank until the pump nozzle switches off.
Overfilling the fuel tank could damage the fuel system.
See also:
Avoiding a section of the route blocked
by a traffic jam
This function blocks a section of the route
ahead of you. You can set the length of the
blocked route section. If possible, COMAND
calculates a detour around the blocked
section of the route.
...
Ashtray in the front-compartment center console
You can remove the ashtray
insert and
use the resulting compartment for
stowage.
The stowage space under the
ashtray is
not heat resistant. Before placing lit
cigarettes in the ashtray, ...
Position of the steering wheel when theEASY-ENTRY/EXIT feature is active
The steering wheel swings upwards when
you:
• remove the SmartKey from the ignition
lock
• open the driver's door and KEYLESS-GO is
in position 1
• open the driver's door and the SmartKey is
...