Releasing the parking lock manually
In the event of an electrical malfunction, it is possible to release the selector lever lock manually to move it out of position P, e.g. if you wish to tow the vehicle away.
Do not use any sharp-edged objects to remove the selector lever gaiter from
the center console. This could damage the selector lever gaiter.
- Apply the parking brake.
- Pry off selector lever gaiter : with a flat, blunt object, (e.g. a screwdriver wrapped in cloth) from the right-hand edge, pulling it up and out.
- Press release buttons ; down and simultaneously move the selector lever out of position P.
The selector lever can now be moved freely until it is returned to position P.
See also:
Tire pressure loss warning system(Canada only)
Important safety notes
While the vehicle is in motion, the tire
pressure loss warning system monitors the
set tire pressure using the rotational speed of
the wheels. This enables the system to det ...
Tire pressure of 180 kPa (1.8 bar/
26 psi) is reached
– Switch off the tire inflation compressor.
– Unscrew the filler hose from the valve of
the faulty tire.
After use, excess TIREFIT may run out of
the filler hose. This could cause stains.
...
Moving the map
Showing the crosshair
To hide the menu: slide
the COMAND
controller and, when the Full screen
menu item is shown, press .
To move the map: slide ,
or
the COMAND controller.
A crosshai ...