Problems with the windshield wipers
The windshield wipers are obstructed
Leaves or snow, for example, may be obstructing the windshield wiper movement. The wiper motor has been deactivated.
- For safety reasons, you should remove the SmartKey from the ignition lock.
or
- Switch off the engine using the Start/Stop button and open the driver's door.
- Remove the cause of the obstruction.
- Switch the windshield wipers back on.
The windshield wipers are inoperative
The windshield wiper drive is malfunctioning.
- Select another wiper speed on the combination switch.
- Have the windshield wipers checked at a qualified specialist workshop.
The spray nozzles are misaligned
The windshield washer fluid from the spray nozzles no longer hits the center of the windshield. The spray nozzles are misaligned.
- Have the spray nozzles adjusted at a qualified specialist workshop.
See also:
Notes on selecting, mounting and
replacing tires
• Only mount tires and wheels of the same
type and make.
• Only mount tires of the correct size onto
the wheels.
• After mounting new tires, run them in at
moderate speeds for the first 60 ...
Storing the current speed or calling up
the last stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from r ...
Important safety notes
You will find an illustration of the instrument
cluster in the "At a glance" section
WARNING
A driver's attention to the road and traffic
conditions must always be his/her primary ...