Headlamp cleaning system
The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated ten times while the lights are on and the engine is running (). When you switch off the ignition, the automatic headlamp cleaning system is reset and counting is resumed from 0.
See also:
Storing the current speed or calling upthe last stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising ...
Cleaning the display
Before cleaning the display, make sure that
it is switched off and has cooled down.
Clean the display surface using a
commercially-available microfiber cloth
and TFT/LCD display cleaner.
Dr ...
TIN (Tire Identification Number)
This is a unique identifier which can be used
by a tire manufacturer to identify tires, for
example for a product recall, and thus identify
the purchasers. The TIN is made up of the
manufactur ...