Using KEYLESS-GO
The KEYLESS-GO key must be outside the vehicle. All the doors must be closed.
- Touch recessed sensor surface 1 on the door handle until the side windows and the panorama roof with power tilt/sliding panel are fully closed.
Make sure you only touch recessed sensor surface 1.
- Make sure that all the side windows and the panorama roof with power tilt/sliding panel are closed.
On vehicles with a panorama roof with power tilt/sliding panel:
- Touch recessed sensor surface 1 on the door handle again until the roller sunblinds of the panorama roof with power tilt/ sliding panel close.
- To interrupt convenience closing: release recessed sensor surface 1 on the door handle.
See also:
Installing/removing the towing eye
Installing the towing eye
•► Remove the towing eye from the vehicle
tool kit
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particu ...
Transfer case
This section is only valid for vehicles with 4-wheel drive (4MATIC). Power is
always
transmitted to both axles.
Performance tests may only be
carried
out on a 2-axle dynamometer. The brake
...
Slippery road surfaces
WARNING
The outside temperature indicator is not
designed to serve as an ice-warning device
and is therefore unsuitable for that purpose.
Indicated temperatures just above the
freezing point ...