Releasing seat belts
- Press release button 4() and guide belt tongue 2 back towards belt sash guide 1.
Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or
belt tongue will be trapped in the door or in the seat mechanism. This could damage
the door, the door trim panel and the seat belt. Damaged seat belts can no longer
fulfill their protective function and must be replaced. Consult an authorized Mercedes-
Benz Center.
See also:
Parking position for the exteriormirror on the front-passenger side
Setting and storing the parking position
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. Yo ...
Correct use of the seat belts
WARNING
USE SEAT BELTS PROPERLY
- Seat belts can only work when used
properly. Never wear seat belts in any other
way than as described in this section, as
that could result in serious injuri ...
Sets the specified minimum distance
You can set the specified minimum distance
for DISTRONIC PLUS by varying the time span
between one and two seconds. With this
function, you can set the minimum distance
that DISTRONIC PLUS kee ...
