Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/Stop button repeatedly until all
indicator lamps in the instrument cluster have
gone out. The windshield wipers could
otherwise move and injure you.
Only fold the windshield wipers away from the windshield when vertical. Otherwise, you will damage the hood.
Do not pull the wiper blade. Otherwise, the wiper blade could be damaged.
Do not clean wiper blades too often and do not rub them too hard. Otherwise, the graphite coating could be damaged. This could cause wiper noise.
Fold the wiper arms away from the windshield.
Carefully clean the wiper blades with a damp cloth.
Fold the windshield wipers back again before switching on the ignition.
Hold the wiper arm securely when folding back. The windshield could be damaged if the wiper arm smacks against it suddenly.
See also:
Switching track information on/off
(MP3 mode only)
If the function is switched on, folder and track
names are displayed.
If the function is switched off, disc and file
names are displayed.
Select MP3 using the
buttons on the remote control a ...
Transferring data to another system
(vehicle)
Insert/connect the storage medium (SD
card or USB stick) with the saved data into/
to the relevant interface.
Select Vehicle in the main function bar by
turning the COMAND controller and
p ...
DISTRONIC PLUS displays in the
speedometer
When DISTRONIC PLUS is activated, one or
two segments 2 in the set speed range light
up.
For design reasons, the speed displayed
in the speedometer may differ slightly from
the speed set fo ...