Seat belt
| Problem | Possible causes/consequences and
Solutions |
![]() After starting the engine, the red seat belt warning lamp lights up for six seconds. |
The seat belt warning lamp reminds the driver and front passenger to
fasten their seat belts.
|
![]() After starting the engine, the red seat belt warning lamp lights up. In addition, a warning tone sounds for up to six seconds. |
Risk of injury The driver's seat belt is not fastened. The warning tone ceases. |
![]() The red seat belt warning lamp lights up after the engine starts, as soon as the driver's or the front-passenger door is closed. |
Risk of injury The driver or front passenger has not fastened their seat belt. The warning lamp goes out. |
| Risk of injury There are objects on the front-passenger seat. The warning lamp goes out. |
|
![]() The red seat belt warning lamp flashes and an intermittent audible warning sounds. |
Risk of injury The driver or front passenger has not fastened their seat belt. In addition, you are driving faster than 15 mph (25 km/h) or you have briefly driven faster than 15 mph (25 km/h). The warning lamp goes out and the intermittent warning tone ceases. |
| Risk of injury There are objects on the front-passenger seat. In addition, you are driving faster than 15 mph (25 km/h) or you have briefly driven faster than 15 mph (25 km/h). The warning lamp goes out and the intermittent warning tone ceases. |
See also:
Range of the sensors
General notes
The sensors must be free of dirt, ice and
slush; otherwise they may not function
correctly. Clean the sensors regularly, taking
care not to scratch or damage them.
Side view
...
MAX COOL maximum cooling
The MAX COOL function is only available in
vehicles for the USA.
MAX COOL is only operational when the
engine is running.
When you activate MAX COOL, climate
control switches to the following ...
Setting the audio format
Further information on audio formats is
available in the "Audio" section.
Select DVD-A using the
buttons on the remote control and press
the button to confirm.
Select Group using ...

Solutions


