Activation conditions

You can activate the HOLD function if:
• the vehicle is stationary.
• the driver's door is closed or your seat belt is fastened.
• the electric parking brake is released.
• the hood is closed.
• the transmission is in position R, N or D.
The trunk lid must be closed in position R.
• DISTRONIC PLUS is deactivated.

    See also:

    Automatic transmission
    WARNING It is dangerous to shift the automatic transmission out of parking position P or neutral position N if the engine speed is higher than idle speed. If your foot is not firmly on the ...

    Jump-starting
    WARNING Failure to follow these directions will cause damage to the electronic components, and can lead to a battery explosion and severe injury or death. Never lean over batteries while conne ...

    Vehicles with automatic transmission
    Apply the parking brake firmly. Shift the transmission to position P. Using the SmartKey Turn the SmartKey to position 0 in the ignition lock and remove it. The immobilizer is activated ...