Notes on using climate control
Below, you can find a number of notes and recommendations to help you use climate control optimally.
• Activate climate control using the
rocker switch. The indicator lamp in the
rocker switch lights up.
• Set the temperature to 72 °F (22 °C).
• Only use the "defrosting" function briefly until the windshield is clear again.
• Only use "air-recirculation" mode briefly, e.g. if there are unpleasant outside odors or when in a tunnel. The windows could otherwise fog up as, in air-recirculation mode, no fresh air is drawn into the vehicle.
• Use the residual heat function if you want to heat or ventilate the vehicle interior when the ignition is switched off. The "residual heat" function can only be activated or deactivated with the ignition switched off.
See also:
Control panel for 3-zone automatic climate control
Canada only
Front control panel
1. To set climate control to automatic
2. To defrost the windshield
3. To switch the ZONE function on/off
4. Display
5. To activate/deactivate air-r ...
Uploading/downloading data
With this function, you can transfer COMAND
data from one system (vehicle) to another
system (vehicle). You can use either a USB
stick or an SD card as temporary storage.
You can only transfer ...
Problems with the SmartKey
Problem
Possible causes/consequences and
Solutions
You cannot lock or unlock the vehicle using
the SmartKey.
The SmartKey battery is discharged or nearly discharged.
...