Important safety notes

WARNING
For safety reasons, switch off the windshield wipers and remove the key from the ignition lock before changing the wiper blades (vehicles with KEYLESS-GO: make sure that the on-board electronics are in state 0).
Otherwise, the wiper motor could be switched on suddenly and cause injury.

make sure that you touch only the wiper To avoid damaging the wiper blades, make sure that you touch only the wiper arm of the wiper.

arm has been folded away from the Never open the hood if a windshield wiper arm has been folded away from the windshield.

Never fold a windshield wiper arm without a wiper blade back onto the windshield.

Hold the windshield wiper arm firmly when you change the wiper blade. If you release the windshield wiper arm without a wiper blade and it falls onto the windshield, the windshield may be damaged by the force of the impact.

Mercedes-Benz recommends that you have the wiper blades replaced by a qualified specialist workshop, e.g. at an authorized Mercedes-Benz Center.

arms vertically before folding them away Always position the windshield wiper arms vertically before folding them away from the windshield. By doing so, you will avoid damage to the hood.

    See also:

    Where am I?
    You can view your current position whether or not route guidance has been interrupted. 1 Current position 2 Next intersection or exit 3 Most recent intersection or exit 4 Current street ...

    Important safety notes
    WARNING Make sure absolutely no objects are obstructing the pedals' range of movement. Keep the driver's footwell clear of all obstacles. If there are any floormats or carpets in the footwell ...

    High-beam headlamps
    To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. Turn the light switch to . Press the combination switch beyond the pressure p ...