High-beam spot lamp (vehicles with LED-daytime running lamps)/infrared light (Night View Assist Plus)
Due to their location, have the bulbs in the left-hand headlamp changed at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.
Switch off the lights.
Open the hood.
Turn housing cover 1 counter-clockwise
and pull it out.
Turn bulb holder 2 counter-clockwise and
pull it out.
Push the two detents on the right and left
of bulb holder 2 and pull the bulb from
bulb holder 2.
Insert the new bulb into bulb holder 2 until
it engages.
Insert bulb holder 2 into the guide in the
headlamp.
Cable outlet 3 must be pointing down and to the right.
Turn bulb holder 2 clockwise.
Cable outlet 3 must be pointing down and to the left.
Align housing cover 1 and turn it
clockwise until it engages.
See also:
Information about driving abroad
Converting to symmetrical low beam
when driving abroad: switch the headlamps
to symmetrical low beam in countries in
which traffic drives on the opposite side of the
road to the country where ...
Introduction
SRS consists of:
• the
SRS warning lamp
• air bags
• air bag control unit (with crash sensors)
• Emergency Tensioning Devices/belt
buckle tensioners
• belt force limiters
SRS reduces the ri ...
Introduction
When the automatic transmission is in position D, it is possible to restrict
or derestrict the shift range (). The shift range selected is shown in
the multifunction display. The automatic transmi ...