Manual interior lighting control
To switch the front interior lighting on/off: press the c button.
To switch the rear interior lighting on/off: press the u button.
To switch the reading lamps on/off: press the p button.
See also:
Storing the current speed or calling up
a stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from r ...
Opening and closing
Overhead control panel
To open
To open
To close
Turn the SmartKey to position 1 or 2 in the ignition lock.
Press or pull the switch
in the corresponding direction.
If you press ...
Tire pressure of at least 180 kPa
(1.8 bar/26 psi) is not reached
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has not been achieved:
– Switch off the tire inflation compressor.
– Unscrew the filler hose from the valve of
the faulty tire.
– ...