Automatic headlamp mode
To switch on automatic headlamp
mode: turn the light switch to 
.
SmartKey in position 1 in the ignition lock:
the parking lamps are switched on or off automatically depending on the brightness of the ambient light.
With the engine running: depending on the brightness of the ambient light, the daytime running lamps or the parking lamps and low-beam headlamps are switched on or off automatically.
When the low-beam headlamps are
switched on, the 
indicator lamp on
the light switch lights up.
WARNING
If the light switch is set to ,
the low-beam
headlamps will not come on automatically if
it is foggy. This could endanger you and
others. Therefore, turn the light switch to
in fog.
The automatic headlamp feature is only an
aid. The driver is responsible for the vehicle's
lighting at all times.
WARNING
When it is dark or foggy, turn the light switch
quickly from to
. Otherwise, the
headlamps could switch off temporarily and
you could cause an accident.
See also:
Important safety notes
WARNING
For safety reasons, switch off the windshield wipers and remove the key from
the ignition lock before changing the wiper blades (vehicles with KEYLESS-GO: make
sure that the on-board ...
Important safety notes
The use of seat belts and infant and child
restraint systems is required by law in all 50
states, the District of Columbia, the U.S.
territories and all Canadian provinces.
Even where this is no ...
Special seat belt retractor
All seat belts except the driver's seat belt are
equipped with a special seat belt retractor.
When activated, the special seat belt
retractor ensures the seat belt will not
slacken once the chi ...