Setting the ambient light

You can make the following settings:
• SOLAR (yellow interior lighting)
• NEUTRAL (white interior lighting)
• POLAR (blue interior lighting)
• Brightness of the interior lighting on a scale of 0 (off) to 5 (bright)

To set the ambient lighting: select

Vehicle in the main function bar by sliding To set the ambient lighting: select Vehicle in the main function bar by sliding the COMAND and turning controller and press to confirm. the COMAND controller and press The main area is active. to confirm.

The main area is active.

sliding or turning Select the Ambient Lighting menu by sliding the COMAND or turning controller. the COMAND controller.

The ambient lighting menu appears. The current setting is indicated by a dot. dot.

or turning Select Setting by sliding or turning or turning The selected setting is indicated by a the COMAND controller.

The selected setting is indicated by a dot. dot.

    See also:

    Introduction
    In the DriveAssist. menu you can:  - show the distance display  - activate/deactivate ESP®  - activate/deactivate PRE-SAFE® Brake  - activate/deactivate ATTENTION AS ...

    Removing/installing the headlamp cover
    You must remove the headlamp cover in the engine compartment before you can replace the bulbs in the headlamp. To remove: press retaining clip 1 in the direction of the arrow. Pull cover 2 f ...

    Problems with Night View Assist Plus
    Problem Possible causes/consequences and - Solutions The picture quality of Night View Assist Plus has deteriorated. The windshield wipers are smearing the windshield. ...