Activating AUX mode

AUX drive

buttons on the remote Select AUX in the menu using the control and press the  button to buttons on the remote control and press the confirm. button to confirm.

The AUX menu appears.

press the  button to confirm. Select Source from the AUX menu and press the Select Disk Drive Aux and press the button to confirm.

button to confirm. Select Disk Drive Aux and press the button to confirm. button to confirm.

You will hear and see the content of the external video source if it is connected to the CD/DVD drive and switched to playback. If no video image is available from the AUX source connected, you will see an audio menu.

Displaying AUX

video source is connected using the remote Select the screen to which the external video source is connected using the remote control.

buttons on the remote Select AUX in the menu using the control and press the  button to buttons on the remote control and press the confirm. button to confirm.

press the  button to confirm. Select Source from the AUX menu and press the Select Display Aux and press the button to confirm.

button to confirm. Select Display Aux and press the button to confirm. button to confirm.

You will see and hear the content of the video source if it is switched to playback. If no video image is available from the AUX source connected, you will see an audio menu.

Selecting the active COMAND source

buttons on the remote Select AUX in the menu using the control and press the  button to buttons on the remote control and press the confirm. button to confirm.

press the  button to confirm. Select Source from the AUX menu and press the Select COMAND and press the button to confirm.

button to Select COMAND and press the button to button to confirm.

The audio or video mode selected in COMAND is transmitted to the Rear Seat Entertainment System.

    See also:

    Vehicle tool kit
    The vehicle tool kit can be found in the stowage well under the trunk floor. X To remove the cargo compartment stowage tray/cover: lift up the floor of the cargo compartment (). Remove stowag ...

    Tire pressure of at least 180 kPa (1.8 bar/26 psi) is not reached
    If, after five minutes, a pressure of 180 kPa (1.8 bar/26 psi) has not been achieved: – Switch off the tire inflation compressor. – Unscrew the filler hose from the valve of the faulty tire. – ...

    Preparing the vehicle
    Your vehicle may be equipped with a "Minispare" emergency spare wheel or MOExtended tires (tires with run-flat properties). Vehicle preparation is not necessary on vehicles with MOEx ...