Activating audio AUX mode

When you connect an external audio source, audio AUX is not selected automatically.

sliding and turning Select Audio in the main function bar by sliding the COMAND and turning controller and press to confirm. the COMAND controller and press Select AUX using to confirm.

and press Select AUX using to and press to to confirm.

The audio AUX menu appears. The medium in the external audio source is played, if the source is connected and playback selected.

Please see the respective operating

Please see the respective operating instructions for how to operate the external audio source.

You will find details on volume and sound settings in the "At a glance" section.

WARNING
External audio sources may have different volumes, which can mean that system messages such as traffic announcements and navigation system announcements are much louder. If necessary, please deactivate the system messages or adjust their volume manually.

    See also:

    Setting the footwell temperature
    The footwell temperature can be set via COMAND. ...

    Calibrating the compass
    Make sure that there is sufficient space for you to drive in a circle without impeding the remaining traffic. In order to calibrate the compass correctly, observe the following points: ca ...

    Low-beam headlamps (halogenheadlamps)
    ► Switch off the lights. ► Open the hood. ► Turn housing cover 1 counter-clockwise and pull it out. ► Turn bulb holder 2 counter-clockwise and pull it out. ► Take ...