Separate USB connection

In addition to the USB connection on the Media Interface, there is another USB connection in the glove box. This connection can also be used to play audio files.

Electrical consumption at this connection must not exceed a continuous current of 500 mA. If the electrical consumption is higher, use a separate source to provide power for the USB device (e.g. 12 V power supply).

the audio source: select Audio by sliding To select music from the USB port as the audio source: select Audio by sliding the COMAND and turning controller and press to confirm. the COMAND controller and press The audio menu appears. to confirm.

The audio menu appears.

confirm. Select USB and press confirm. to confirm.

    See also:

    Problems with the SmartKey
    Problem You cannot lock or unlock the vehicle using the SmartKey. Possible causes/consequences and Solutions The SmartKey battery is discharged or nearly discharged. Try again to lock/unlock th ...

    Ruts and gravel roads
    Observe the following rules when driving along ruts in off-road terrain or on roads with loose gravel: Check that the ruts are not too deep and that your vehicle has sufficient clearance. Othe ...

    Activating/deactivating Lane Keeping Assist
    You can use the Lane Keep. Asst. function to activate/deactivate Lane Keeping Assist (Y page 200) or Active Lane Keeping Assist. – Press the or button on the steering wheel to select the Dri ...