Switching wavebands

sliding and turning Select FM, AM or WB in the radio display by sliding the COMAND and turning controller and press to confirm. the COMAND controller and press Waveband submenu is opened. to confirm.

Waveband submenu is opened.

1 The waveband submenu (the dot

1 The waveband submenu (the shows the waveband currently set) dot shows the waveband currently set)

confirm. Select a waveband and press confirm. to confirm.

You will hear the last station played on the selected waveband.

    See also:

    High-beam headlamps (halogen headlamps)
    - Switch off the lights. - Open the hood. - Turn housing cover 1 counter-clockwise and pull it out. - Pull lever 3 upwards and remove bulb holder 2. - Take the bulb out of bulb holder 2. - ...

    Cleaning the paintwork
    Scratches, corrosive deposits, areas affected by corrosion and damage caused by inadequate care cannot always be completely repaired. In such cases, visit a qualified specialist workshop, e.g. ...

    Xenon bulbs
    If your vehicle is equipped with Xenon bulbs, you can recognize this by the following: the cone of light from the Xenon bulbs moves from the top to the bottom and back again when you start the eng ...