Function restrictions

You will not be able to use the telephone, will no longer be able to use the telephone, or you may have to wait before using it, in the following situations:
• when the mobile phone is switched off
• when the "Bluetooth®" function is switched off in COMAND
• when the "Bluetooth®" function is switched off on the mobile phone
• if the mobile phone is not logged into a mobile phone network

on to a network. If no network is available, The telephone automatically tries to log on to a network. If no network is available, you will not be able to make a "911" emergency call. If you attempt to make an outgoing call, the NO SERVICE message will appear for a short while.

• if you remove the SmartKey from the ignition lock during an active conversation in hands-free mode, the conversation may be continued for up to 30 minutes. After that time, it will be interrupted.

You can prevent this interruption by switching to "private call" ("private mode") on the mobile phone before deactivating COMAND (see mobile phone operating instructions).

If you wish to switch off COMAND during an active conversation in hands-free mode, the following message will appear: You cannot shut off COMAND until you have finished your telephone call

    See also:

    Making adjustments in 5 mph (Canada: 10 km/h) increments
    Briefly press the cruise control lever beyond the pressure point, up 1 for a higher speed or down 2 for a lower speed. The last speed stored is increased or reduced. ...

    Opening and closing the side trimpanels
    You must open the side trim panel in the cargo compartment before you can change the bulbs in the tail lamps. Left-hand side trim panel ► To open: turn release knob 1 90° in the direction ...

    Lights
    Switching the daytime running lamps on/off This function is not available in Canada. If you have activated the Daytime Running Lights function and the light switch is in the position, the dayti ...