Switching on/off
The three red indicator lamps in the button indicate the heating level you have selected.
If the battery voltage is too low, the seat
heating may switch off.
The system automatically switches down from level 3 to level 2 after approximately eight minutes.
The system automatically switches down from level 2 to level 1 after approximately ten minutes.
The system automatically switches off approximately 20 minutes after it is set to level 1.
Make sure that the SmartKey is in position
2 in the ignition lock.
To switch on: press button 1 repeatedly
until the desired heating level is set.
To switch off: press button 1 repeatedly
until all the indicator lamps go out.
See also:
Cleaning the seat belts
Use clean, lukewarm water and soap solution.
Do not clean the seat belts using chemical cleaning agents. Do not dry the
seat belts by warming them above 176 ‡ (80 †) or placing them in dire ...
The bodywork: A first: frameless, all-aluminium doors
Intelligent lightweight construction plays a decisive role in bridging the
classic conflict of objectives between low weight and high strength in the new
CLS. The CLS is thus the first vehicle fro ...
Restarting the tire pressure monitor
WARNING
It is the driver's responsibility to set the tire
pressure to the recommended cold tire
pressure. Underinflated tires affect the ability
to steer or brake the vehicle. You might lose ...