Resetting the rear sunblind

Door control panel in rear
Door control panel in rear

ignition lock. Turn the SmartKey to position 1 or 2 in the ignition lock.
roller sunblind is fully closed. Pull switch 1 repeatedly until the rear roller sunblind is fully closed.
second. Keep switch 1 pulled for an additional second.
be opened fully again. Make sure that the rear roller sunblind can be opened fully again.
above again. If this is not the case, repeat the steps above again.

    See also:

    Emergency Tensioning Devices, belt force limiters
    The front seat belts and the outer seat belts in the rear are equipped with ETDs and seat belt force limiters. The ETDs tighten the seat belts in an accident, pulling them close against the bod ...

    Seat belt
    Display messages Possible causes/consequences and Solutions After starting the engine, the red seat belt warning lamp lights up for six seconds. The seat belt war ...

    Problems with the engine
    Problem Possible causes/consequences and Solutions The engine does not start. The starter motor can be heard. - There is a malfunction in the engine electronics. - There i ...