Opening and closing

Overhead control panel
Overhead control panel

1 To raise
2 To open
3 To close/lower

The panorama roof with power tilt/sliding panel can only be operated when the roller sunblind is open.

opens first when the panorama roof with If the front roller sunblind is closed, it opens first when the panorama roof with power tilt/sliding panel is raised.

ignition lock. Turn the SmartKey to position 1 or 2 in the ignition lock.
corresponding direction. Push or pull the corresponding direction. switch in the corresponding direction.

the If you press the the switch beyond the point of resistance, an automatic opening/closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again.

    See also:

    Roof carrier
    Important safety notes WARNING   Only use carriers when the crossbars have been completely mounted. The left and right roof rails are only stabilized by means of the crossbars mounted. ...

    Instruction labels for tires and load
    WARNING Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires can o ...

    Cleaning the sensors
      Clean sensors 1 of the driving systems with water, car shampoo and a soft cloth. When cleaning the sensors with a power washer, maintain a distance between the vehicle and the nozzl ...