Immobilizer
The immobilizer prevents your vehicle from being started without the correct SmartKey.
When leaving the vehicle, always take the SmartKey with you and lock the vehicle. The engine can be started by anyone with a valid SmartKey that is left inside the vehicle.
To activate with the SmartKey: remove
the SmartKey from the ignition lock.
To activate with KEYLESS-GO: switch the
ignition off and open the driver's door.
To deactivate: switch on the ignition.
The immobilizer is always deactivated
when you start the engine.
See also:
Important safety notes
If a tire pressure monitor system is installed,
the vehicle's wheels have sensors that
monitor the tire pressures in all four tires. The
tire pressure monitor warns you if the
pressure drops i ...
Maximum load rating
WARNING
Do not overload the tires by exceeding the specified load limit as indicated
on the Tire and Loading Information placard on the driver's door B-pillar. Overloading
the tires can ...
Setting the compass
Determine your position using the following zone maps.
North America zone map
South America zone map
Press a round pin into opening 3() for approximately three seconds.
The currently ...
