Mounting a new wheel
WARNING
Always replace wheel bolts that are damaged
or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be repaired immediately. Do not continue to drive under these circumstances! Contact an authorized Mercedes-Benz Center or call Roadside Assistance.
Incorrect wheel bolts or improperly tightened wheel bolts can cause the wheel to come off.
This could cause an accident. Make sure to use the correct wheel bolts.
WARNING
Only use genuine Mercedes-Benz wheel bolts.
Other wheel bolts may come loose. Do not tighten the wheel bolts when the vehicle is raised. Otherwise, the vehicle could fall off the jack.
WARNING
Make sure to use the original length wheel
bolts when remounting the original wheel
after it has been repaired.
•► Clean the wheel and wheel hub contact surfaces.
To prevent damage to the paintwork, hold the wheel securely against the wheel hub while screwing in the first wheel bolt.
AMG vehicles: during removal and repositioning of the wheel, the wheel rim can strike the ceramic-brake disc and damage it. Therefore, take precautions and get a second person to assist you.
Alternatively, you can use a second alignment bolt.
•► Slide the emergency spare wheel onto the alignment bolt and push it on.
•► Tighten the wheel bolts until they are finger-tight.
•► Unscrew the alignment bolt.
•► Tighten the last wheel bolt until it is fingertigh
See also:
Engine oil viscosity
Viscosity describes the flow characteristics
of a fluid. If an engine oil has a high viscosity,
this means that it is thick; a low viscosity
means that it is thin.
Select an engine oil with an ...
Setting a speed
WARNING
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to
a value that the prevailing road condi ...
Overview
The on-board computer is activated as soon
as you turn the SmartKey to position 1 in the
ignition lock.
You can control the multifunction display and
the settings in the on-board computer using ...